* Measured with high accuracy data-logger at sample storage area with standard Set Point.

Standard Chamber Features & Provisions:

• Construction: PCGI/SS 304/SS 316 Tongue & Groove type panels with PUF Density of 40Kg/m³ with thickness of 80 mm.

• Sample Storage:

1. Racks: Heavy Duty SS 304 Frame secured strongly to chamber walls for strength.
2. Trays: Perforated types (CNC punched). Strengthened with support rails to prevent deformations.

•  Doors: PUF Insulated External doors mounted with imported hinges & locks, Inner glass doors with latches. Door frame is secured with silicone gasket on entire perimeter to ensure air tight, leak tight chamber.
• Door Operation: Passcode protected door operation – from software & HMI
• Control System:

1. Ergonomically designed Control Panel.
2. Ferrule printed wiring.
3. Advanced PLC Program with built in processor-based Auto Tuning.
4. 4.3” HMI Color LCD Display.
5. Built in Redundancy & Safety.
6. Advanced High Accuracy “Transmitter based sensors” with output of 4-20 mA.

• Temperature Control:

1. Efficient, Reliable, Time tested & Trustworthy Refrigeration Design.
2. Built in redundancy with PLC based Auto Change Over during power outage or  component failure
3. PLC Controlled “U” Shaped SS Air Heater Banks.

• Optional Backup System: PLC based Auto Change Over Backup system for Refrigeration.

• Safety: Dedicated Thermostats for all key points: Chamber High Temperature, Utility High Temperature

• PLC Safety Cut Off for Temperature: High, Higher & Low, Lower safety cut off .